**DEEET Syllabus 2024 PDF Download: Check Exam Pattern **– Central Selection Committee (CSC) officials have released DEEET Syllabus 2024 and DEEET Exam Pattern PDF. candidates who are preparing for the DEEET Exam 2024 can check and download the DEEET Exam Pattern 2024, along with the DEEET Syllabus 2024 PDFs from the official website @highereducation.tripura.gov.in (OR) deeet.tripura.gov.in. In this article, we have provided the subject-wise DEEET Exam Syllabus 2024 PDFs on this page.

**Tripura Diploma Engineering Entrance Exam Syllabus & Exam Pattern – Overview**

Board Name | Central Selection Committee (CSC) |

Exam Name | Diploma Engineering Entrance Examination of Tripura-2024 (DEEET 2024) |

Category | Entrance Exam Syllabus |

Purpose of Exam | Admission to Diploma Engineering in against available seats in the State of Tripura. |

Selection Process | – |

Official Website | highereducation.tripura.gov.in (OR) deeet.tripura.gov.in |

**DEEET Exam Pattern 2024**

The DEEET Exam will be held to provide Admission to Diploma Engineering in against available seats in the State of Tripura. The questions paper will be held in English & Bengali Languages. It includes 100 questions for 400 marks. The Exam duration of the DEEET paper will be 2 Hours. for each wrong answer, a 1 mark will be deducted.

- Total Question – 100 Questions
- Total Marks – 400 Marks
- Exam Duration – 120 Minutes
- Language – English & Bengali
- Mode of Exam – Objective Type Questions
- Negative Marking – Yes, 1 Mark

Subject Name | Questions | Marks |
---|---|---|

Mathematics | 40 | 160 |

Physical Science/ Science | 40 | 160 |

English | 20 | 80 |

Total | 100 Questions | 400 Marks |

Also Read: |

DEEET Previous Question Papers PDF Download |

DEEET Admit Card |

DEEET Answer Key |

DEEET Results |

DEEET Exam |

**Tripura Diploma Engineering Entrance Exam Syllabus**

– Subject Wise

– Subject Wise

**SECTION I: MATHEMATICS**

**Unit I: Arithmetic**

Real Numbers Euclid’s division lemma, the fundamental theorem of arithmetic – statement after illustrating and motivating through examples, proofs of irrationality of √2, √3, √5. the decimal representation of rational numbers in terms of terminating, non-terminating, and recurring decimals.

**Unit II: Algebra**

Polynomial zeros of a polynomial. relationship between zeros and co-efficients of quadratic polynomials. statement and simple problems on division algorithms for polynomials with real coefficients. Pair of linear equations in two variables and graphical method of their solution; consistency/ inconsistency. algebraic conditions for a number of solutions. solution of a pair of linear equations in two variables algebraically – by substitution, by elimination and by cross multiplication method. simple situational problems. Simple problems on equations are reducible to linear equations. Quadratic equations Standard form of a quadratic equation ax2+ bx + c = 0 (a≠0),

solutions of quadratic equations (only real roots) by factorization, by completing the square and by using the quadratic formula, relationships between discriminant and nature of roots, situational problems based on quadratic equations related to day to day activities to be incorporated.

Arithmetic progressions Motivation for studying arithmetic progression, derivation of the nth term and sum of the first n terms of a.p. and their application in solving daily life problems. The logarithm of a real positive number with respect to a base (≠ 0,1) laws of the logarithm, simple problems involving logarithm.

**Unit-III: Geometry**

Triangles, Circles definitions, examples, counter examples of similar triangles.

**Unit IV: Trigonometry**

4.1 Introduction to trigonometry Trigonometric ratios of an acute angle of a right-angled triangle, proof of their existence (well defined), motivate the ratio whichever are defined at 0 and 900 values (with proofs) of the trigonometric ratios of 300, 450, and 600, relationships among the ratios.

4.2 Trigonometric identities: Proofs and applications of the identities sin2

a + cos2

a = 1 ; sec2

a = 1 + tan2

a; cosec2

a = 1+cot2

4.3 Heights and distances

Introduction, line of sight, angles of elevation, angles of depression, simple problems on heights and distances, problems should not involve more than two right triangles, angles of elevation/depression should be only 300, 450, 600.

**Unit-V: Mensuration**

5.1 Areas related to circles: Motivate the area of a circle, area of sector and segment of a circle, problems based on areas and perimeter / circumference of the above said plane figures (in calculating area of segment of a circle, problems should be restricted to central angle of 600, 900, and 1200 only. plane figures involving triangles, simple quadrilaterals, and circles should be taken.)

5.2 Surface areas and volumes

5.2.1 Surface areas and volumes of combinations of any two of the following: cubes, cuboids, spheres, hemispheres, and right circular cylinders, cones, frustum of a cone.

5.2.2 problems from real life situation such as converting one type of metallic solid into another, combination of solids( not more than two types), immersing a solid into a liquid contained in another solid, flow of water through a pipe, embankment.

**Unit VI: Co-ordinate geometry**

6.1 Introduction, the concept of coordinate geometry, the distance between two points, section formula, area of a triangle.

**Unit-VII: Statistics and probability**

7.1 Statistics

Mean, median, and mode of grouped data (the bimodal situation is to be avoided) cumulative

frequency graph.

**SECTION II: SCIENCE/ PHYSICAL SCIENCE**

**Section II A: Physics**

Unit I: Force and Newton’s laws: Force and Motion, Newton’s Laws of Motion, Action and Reaction forces, Inertia of a body, Inertia and mass, Momentum, Force and Acceleration, Elementary idea of conservation of Momentum, Work done by a Force, Energy, power; Kinetic and Potential energy; Law of conservation of energy.

Unit II: Electricity: Electric current, potential difference and electric current, Ohm’s law; Resistance, Resistivity, Factors on which the resistance of a conductor depends, Series combination of resistors, parallel combination of resistors and its applications in daily life, the Heating effect of electric current and its applications in daily life, Electric power, Interrelation between P, V, I and R.

Unit III: Magnetic effects of Current: Magnetic field, field lines, field due to a current carrying conductor, field due to current carrying coil or solenoid; Force on current carrying conductor, Fleming’s Left Hand Rule. Electromagnetic induction, Induced potential difference, Induced current. Fleming’s Right Hand Rule, Direct current. Alternating current: frequency of AC. Advantage of AC over DC, Domestic electric circuits.

Unit IV: Light – Reflection and Refraction: Reflection of light by curved surfaces; Images formed by spherical mirrors, centre of curvature, principal axis, principal focus, focal length, mirror formula (Derivation not required), magnification, Refraction; Laws of refraction, refractive index. Refraction of light by spherical lens; Image formed by spherical lenses; Lens formula (Derivation not required); Magnification, Power of a lens; applications of spherical mirrors and lenses.

Unit V: Sound: Nature of sound and its propagation in various media, speed of sound, range of hearing in humans; ultrasound; a reflection of sound; echo, and SONAR. Structure of the Human Ear (Auditory aspect only)

Unit VI: Sources of Energy: Different forms of energy, conventional and non-conventional sources of energy: Fossil fuels, solar energy; biogas; wind, water, and tidal energy; Nuclear energy, Renewable versus non-renewable sources of Energy.

**Section IIB: Chemistry**

Unit VII: Matter – Nature and Behaviour Definition of matter; solid, liquid, and gas; characteristics – shape, volume, density; change of state-melting (absorption of heat), freezing, evaporation (cooling by evaporation), condensation, sublimation, Elements, compounds and mixtures, Heterogeneous and homogenous mixtures, colloids and suspensions. Atoms and molecules, Law of constant proportions, Atomic and molecular masses, Mole concept: Relationship of mole to mass of the particles and numbers, Electrons, protons and neutrons, valency, the chemical formula of common compounds, Isotopes and Isobars.

Unit VIII: Chemical reactions: Chemical Equation, Balanced chemical equation, implications of a balanced chemical equation, types of chemical reactions: combination, decomposition, displacement, double displacement, precipitation, neutralization, oxidation, and reduction.

Unit IX: Acids, Bases, and Salts: Their definitions in terms of furnishing of H+ and OH– ions, General properties, examples, and uses, the concept of pH scale (Definition relating to logarithm not required), the importance of pH in everyday life; preparation and uses of sodium hydroxide, Bleaching powder, Baking soda, washing soda and Plaster of Paris.

Unit X: Metals and Non-metals: Properties of metals and non-metals, reactivity series, formation and properties of ionic compounds, basic metallurgical processes, corrosion, and its prevention.

Unit XI: Carbon compounds: Covalent bonding in carbon compounds. Versatile nature of carbon. Homologous series. Nomenclature of carbon compounds containing functional groups (halogens, alcohol, ketones, aldehydes, alkanes, and alkynes), the difference between saturated hydrocarbons and unsaturated hydrocarbons. Chemical properties of carbon compounds (combustion, oxidation, addition, and substitution reaction). Ethanol and Ethanoic acid (only properties and uses), soaps and detergents.

Unit XII: Periodic classification of elements Need for classification, Modern Periodic table, Gradation in Properties, Valency, Atomic number, metallic and non-metallic properties.

SECTION-III: ENGLISH

- Unit I: Tenses
- Unit II: Modals
- Unit III: Voice, Active voice, passive voice
- Unit IV: Subject–verb concord
- Unit V: Reporting/ Narration
- Commands and requests, Statements, Questions etc.
- Unit VI: Clauses:
- Noun clauses, Adverb clauses, Relative clauses, etc.
- Unit VII: Parts of speech, Determiners
- Unit VIII: Prepositions

**DEEET Syllabus 2024 PDF Download Link**

Download DEEET Syllabus 2024 PDF | Download PDF |

**DEEET Syllabus 2024 – FAQs**

**Q.1 Who is conducting the DEEET Exam?**

Answer: Central Selection Committee (CSC) is conducting the DEEET Exam 2024.

**Q.2 What is the Exam duration for the DEEET 2024?**

Answer: The Exam duration for the DEEET 2024 is 120 minutes.

**Q.3 How many questions will be in the DEEET 2024 Exam?**

Answer: DEEET 2024 Exam will consist of 100 Questions

**Q.4 What is the type of exam in DEEET 2024?**

Answer: The type of exam is Multiple Choice Questions (MCQ).

**★★ ★★ You Can Also Read ★★★★**

Computer Awareness Quiz Questions Set (Banking) |

Read Daily Current Affairs Topic Wise |

Daily Current Affairs Quiz (Current GK Test) |

Static Gk Quiz Questions and Answers |

📣 Prepare Exams is now on **Facebook**, **Twitter**, **Instagram,** **YouTube Channel**, and **Google News** to get all the latest News first Like, Follow and bookmark our website @ PrepareExams.com.