AP ECET Syllabus 2025 – Andhra Pradesh State Council of Higher Education (APSCHE) officials released the Syllabus 2025 of the AP Engineering Common Entrance Test (AP ECET) along with the AP ECET Exam Pattern 2025 on the official website i.e. www.cets.apsche.ap.gov.in. Candidates will be searching for the complete AP Engineering Common Entrance Test (AP ECET) Syllabus for the Written Exam so you are at the right place. we have provided the AP Engineering Common Entrance Test (AP ECET) Pattern 2025 in the below sections for candidates who have applied and started preparing for the AP Engineering Common Entrance Test (AP ECET) Exam 2025.
Moreover, we have shared the AP ECET Exam Pattern, Selection Process 2025 for the Engineering and Pharmacy courses in the below sections alogn with the AP ECET Syllabus 2025 in PDF format. So, you can check and access the PDF free of cost. We have also given you with the AP ECET Engineering Syllabus 2025 for All the Branches.
Table of Contents
AP ECET Syllabus 2025 – Overview
Board Name | Andhra Pradesh State Council of Higher Education (APSCHE) |
Exam Name | AP Engineering Common Entrance Test (AP ECET) 2025 |
Category | Entrance Exam Syllabus |
Purpose of Exam | – |
Selection Process | – |
Official Website | cets.apsche.ap.gov.in |
AP ECET Exam Pattern 2025
The AP ECET question paper of the recruitment test will be 200 MCQ (Multiple Choice Questions) with a Maximum mark of 200 marks and All questions carry equal marks. The Exam duration of the paper will be 120 minutes or 2 Hours. for each wrong answer, a -0 mark will be deducted.
- Total Question – 200 Questions
- Total Marks – 200 Marks
- Exam Duration – 120 minutes
- Language –
- Mode of Exam – Offline
- Paper Type – MCQ
- Negative Marking – No
AP ECET Engineering Test Pattern 2025
Subject Name | Marks | Remarks |
---|---|---|
Mathematics | 50 | Common to all Branches |
Physics | 25 | Common to all Branches |
Chemistry | 25 | Common to all Branches |
Engineering (Civil/ Electrical/ Mechanical/ Electronics & Communication/ Computer/ Chemical/ Metallurgical/ Mining/ Electronics & Instrumentation/ Ceramic Technology/ Bio-Technology as the case may be) | 100 | Separate question Papers for Each Branch |
Total Marks | 200 |
AP ECET Pharmacy Test Pattern 2025
Subject Name | Marks |
---|---|
Pharmaceutics | 50 |
Pharmaceutical Chemistry | 50 |
Pharmacognosy | 50 |
Pharmacology | 50 |
Total Marks | 200 |
AP ECET B.Sc Mathematics Test Pattern 2025
Subject Name | Marks |
---|---|
Mathematics | 100 |
Analytical Ability | 50 |
Communicative English | 50 |
Total Marks | 200 |
Download Andhra Pradesh ECET Syllabus 2025 PDF – Subject Wise
Diploma Holders in Engineering
- AGRICULTURAL ENGINEERING
- CERAMIC TECHNOLOGY
- CHEMICAL ENGINEERING
- CIVIL ENGINEERING
- COMPUTER SCIENCE AND ENGINEERING
- ELECTRICAL AND ELECTRONICS ENGINEERING
- ELECTRONICS AND COMMUNICATION ENGINEERING
- ELECTRONICS AND INSTRUMENTATION ENGINEERING
- MECHANICAL ENGINEERING
- METALLURGICAL ENGINEERING
ELEMENTS OF MINING: Definitions of Terms, Mineral based industries, Mining operations, modes of entry, shaft, incline, adit, Applicable conditions, Limitations, Mining Methods used in coal and Non coal mining, Classification of the mineral deposits based on various factors, classification of coal seams based on various factors. Classification of methods of workingU/G Coal, OCM & Metal Mining, Bore(Drill) holes uses, classification and various tools used in boring(Drilling), feed mechanism, core recovery, deviation of boreholes, Core barrels. Explosives- Characteristics, classification, composition, properties, different explosives used in U/G, OCM, Metal and coal mines, selection of explosives and initiation of explosives, Fuses – types, Detonators- types.
Blasting practice in Mines- terms, tools, rules and provisions related to- Induced Blasting, different types of blasting practice, different types of drill bits, reconditioning of drill bits, dangers and precautionary measures of blasting, fuse and electric blasting, dealing with misfire. Shaft sinking – Selection of site, different stages of sinking through sub soil, temporary and permanent supporting of shafts, purpose of widening and deepening. Special & modern methods of shaft sinking, pilling, drop shaft method, cementation, freezing method.
2. FUNDAMENTALS OF GEOLOGY: Definition of the term Geology, scope, uses of geology in Mining field, Branches of geology, Physical Geology, Age of the earth, origin of the earthNebular hypothesis of Kant and Laplace, internal structure of earth, weathering, erosion, denudation, Attrition, Abrasion, Earthquakes, Volcanoes. Mineralogy- Terms, Physical characteristics of minerals, important mineral families, industrial uses of important minerals; Occurrence and distribution in A.P and India. Petrology – Classification of Rocks and its characteristics, structures and textures. Structural Geology, folds, faults, joints, unconformities. Stratigraphy – definition, objectives, Geological time scale, major stratigraphical divisions of India, Physio-graphic divisions of India, Economic Geology- Terms,
processes of mineralization and important economic minerals formed by these processes. Geological prospecting- objectives, guide lines for location of mineral deposits in fields, methods of prospecting. Coal Geology-Periods of coal formation, different stages, origin, classification of coal, coalfields in the world and India. Petroleum Geology – Petroleum – Importance, origin, Migration and Accumulation, distribution of oilfields in the world and India. Hydrogeology – Occurrence and source of ground water, vertical distribution, water table, types, Hydrological cycle, precipitation, types, rainfall measurements, Evaporation, types, Infiltration – types, factors affecting infiltration, zone of saturation and aeration, water bearing properties of rocks, porosity, permeability, Aquifer, Aquifuge and Aquiclude.
3. UNDERGROUND COAL MINING METHODS: Methods of working Bord and pillar and long wall – development, opening of districts , different methods of development systems with machines and continuous miners, depillaring. Longwall mining-Long wall advancing, longwall retreating, applicabilities, merits, demerits, limitations. Stowing practice in mines, manual and mechanized, Thick seams – Classification, Principles, methods, Merits and demerits, Special methods of working like inclined slicing, horizontal slicing, blasting gallery, horizon mining, hydraulic mining, Gasification of coal.
4. UNDERGROUND METAL MINING METHODS: Definitions: Development of mineral deposits, levels, sublevels, Winzes and Raises etc. Handling waste rock and mineral, Drilling and blasting, arrangement for loading, conventional and mechanized methods of raising, various stopping methods – classification, applicability, limitation, merits and demerits. Sampling – classification, applicability, Assaying, Salting, Deep mining – problems, problems associated with rise in body temperature, causes, effects, treatment and preventive measures.
5. MINE ENVIRONMENTAL ENGINEERING :Ventilation, objectives/purposes of ventilation, systems of ventilation – natural ventilation and mechanical ventilation. Distribution of mine air, ventilation devices, construction location and application. Auxiliary ventilation, Booster ventilation, Homotropal, anti-tropal systems, Ventilation survey – objectives, methods, precautions and accessories, Mine gases – Composition of mine air, properties of mine air, classification basing on gassiness, physiological effects, occurrence, testing for presence of mine gases, flame safety lamp – Principle and constructional details, Gas detectors- types, determination of percentage of gases using conventional methods and using detectors.
6. MINE HAZARDS AND RESCUE: Mine fires, classification, causes preventive measures. spontaneous heating of coal, different methods of dealing with fires, Collection of air samples and interpretation of Mine air samples, Cowards diagram, calculation of CO/O2 deficiency ratio, reopening of sealed off areas, firefighting equipment and organization, Mine Explosions – Types, Fire damp explosions-causes and preventive measures, Coal dust explosionscauses and preventive measures, treating coal dust, dust barriers, water barriers. Inundation in mines, its causes, precautions, design of dams, accidents due to inundation.
Miners diseases, various forms of environmental pollution due to mining, pollution control methods, various miners diseases-causes, symptoms, treatment and preventive measures. Rescue and Recovery – Operations, objectives, classification of rescue apparatus, Resuscitation apparatus, rescue organization. Gas detectors – recent techniques of gas detection, remote sensing devices, continuous recorders, monitors, Carbon monoxide and multi gas detectors.
7. MINE SURVEYING: Definitions, objectives, Principles, classification, Measurement of distances. Various instruments used in Surveying, chain survey, Fundamentals of compass survey, local attraction, magnetic declination limitation of various surveying methods, various methods of levelling, types of levels, instruments, adjustments, computations, contouring and subsidence, Theodolite types, adjustments, traversing and computations, setting out curves, types, correlation survey, tachometric survey and triangulation Survey, Dip, strike, fault problems, Fundamentals of advance survey – principles of electronic measurement, different instruments, application of remote sensing, GPS, Total station – parts and functions.
8. MINING MACHINERY: Wire ropes- usage, chemical composition, tests of wires, classification, applicability of different wire ropes, causes of deterioration and precautions, capping, recapping methods and rope splicing, Transportation in mines – classification different types of rope haulages, their applicability, merits and demerits limitations. Safety devices in different rope haulages, Locomotive haulages- types, applicability’s, Conveyorstypes, tensioning arrangements, use and applicability in mines, Aerial ropeways, man riding applicability’s, Pumps their applicability in mines, construction details merits, demerits and limitations.
Conventional face machinery, different Drills, Power loaders, Longwall face machinery-AFC, lump breakers, stage loaders, power pack, SERDS, DERDS, safety devices, power support, Flame proof apparatus and Intrinsically safe apparatus- field of applications, features, remote control principle, Signalling methods used in mines, telephones, Winding – purpose, equipment, types of headgear frames, shaft fittings, guides, Pit top and pit bottom arrangements, keps, suspension gear, types of drums, drum and skip winding, Cage winding and Friction (Keope Winding) speed control and safety contrivances.
9. SURFACE MINING AND ROCK MECHANICS: Surface mining – definition, terms, applicability, limitations, merits and demerits, benches – parameters, opening of deposits, drainage, different machinery used in surface mines, applications, merits and demerits, drilling and blasting in surface mines, methods and patterns, dangers and precautions, slope stability,
Common Subjects
- Atomic Structure: Introduction-Fundamental particles – Bohr’s theory – Quantum numbers –– Aufbau principle – Hund’s rule – Pauli’s exclusion principle- Electronic configurations of elementsup to atomic number 20, shapes of s,p,d orbitals.
- Chemical Bonding: Introduction – types of chemical bonds – Ionic bond taking example of NaCland MgO – characteristics of ionic compounds and covalent bond taking example H2, O2 ,N2, HCl characteristics of covalent compounds.
- Solutions: Introduction solution classification of solutions, solute, solvent, concentration, mole concept–Molarity, –Normality, equivalent weight using acids, bases and salts, numerical problems on Molarity and Normality.
- Acids and Bases: Introduction – theories of acids and bases – Arrhinus, Bronsted –Lowry theory – Lewis acid basetheory – Ionic product of water – P H and related numerical problems – buffers solutions – Applications.
- Electrochemistry: Conductors, insulators, electrolytes – electrolysis –Faraday’s laws of electrolysis- numerical problems – Galvanic cell – standard electrode potential – electro chemicalseries –emf and numerical problems on emf of a cell.
- Water Technology: Introduction –soft and hard water – causes of hardness – types of hardness –disadvantages of hardwater – degree of Hardness, units and its relations– softening methods – per mutit process – ion exchange process –qualities of drinking water – municipal treatment of water for drinking purpose.
- Corrosion: Introduction – factors influencing corrosion – electrochemical theory of corrosion- composition cell,stress cell and concentration cells– rusting of iron and its mechanism – prevention of corrosion by a) coatingmethods, b) cathodic protection (sacrificial and impressive voltage methods).
- Polymers: Introduction – polymerisation – types of polymerisation – addition, condensation and co-polymerisation with examples – plastics – types of plastics – advantages of plastics over traditional materials – Disadvantages of using plastics ,thermo plastics and thermo stetting plastics– differences between thermo plastics and thermostetting plastics-preparation and uses of the following plastics : 1. Polythene 2. PVC 3. Teflon 4. Polystyrene 5. Urea formaldehyde –Rubber – natural rubber – processing from latex –Vulcanization – Elastomers – Buna-s, Neoprenerubber and their uses.
- Fuels: Definition and classification of fuels based on physical state and occurrence – characteristics of goodfuel – Extraction and Refining of petroleum – composition and uses of gaseous fuels. A) water gas b) producer gas c) natural gas d) coal gas e) bio gas f) acetylene
- Environmental chemistry Introduction – environment –understand the terms lithosphere, hydrosphere, atmosphere bio sphere, biotic component, energy component pollutant, receptor, sink, particulate, DO, BOD, Threshold limit value, COD- Air pollution – causes-Effects – acid rain, green house effect – ozone depletion – controlof Air pollution – Water pollution – causes – effects – control measures.
MATHEMATICS (FOR DIPLOMA HOLDERS)
Unit-I:
Matrices:Matrices of 3rd order: Types of matrices-Algebra of matrices-Transpose of a matrixSymmetric, skew symmetric matrices-Minor, cofactor of an element-Determinant of a square matrix-Properties-Laplace’s expansion-singular and non singular matrices-Adjoint and multiplicative inverse of a square matrix-System of linear equations in 3 variables-Solutions by Crammer’s rule, Matrix inversion method . Partial Fractions: Resolving a given rational function into partial fractions.
Unit –II:
Trigonometry: Properties of Trigonometric functions – Ratios of Compound angles, multiple angles, sub multiple angles – Transformations of Products into sum or differenceand vice versa – Simple trigonometric equations – Properties of triangles – Inverse Trigonometric functions. Complex Numbers: Modulus and conjugate, arithmetic operations on complex number— Modulus-Amplitude form (Polar form)-Euler form (exponential form)-Properties- De Movire’s Theorem and its applications.
Unit – III :
Analytical Geometry Circles-Equation given center and radius-given ends of diameter-General equation-finding center and radius. Standard forms of equations of Parabola, Ellipse and Hyperbola – simple properties.
Unit – IV :
Differentiation and its Applications Functions and limits – Standard limits – Differentiation from the First Principles – Differentiation of sum, product, quotient of functions, function of function, trigonometric, inverse trigonometric, exponential, logarithmic, Hyperbolic functions, implicit, explicit and parametric functions – Derivative of a function with respect to another function-Second order derivatives –Geometrical applications of the derivative (angle between curves, tangent and normal) – Increasing and decreasing functions – Maxima and Minima (single variable functions) using second order derivative only – Derivative as rate measure -Errors and approximations – Partial Differentiation – Partial derivatives up to second order – Euler’s theorem.
Unit – V :
Integration and Its Applications Indefinite Integral – Standard forms – Integration by decomposition of the integrand of trigonometric, algebraic, exponential, logarithmic and Hyperbolic functions – Integration by substitution – Integration of reducible and irreducible quadratic factors – Integration by parts – Definite Integrals and properties, Definite Integral as the limit of a sum – Application of Integration to find areas under plane curves and volumes of Solids of revolution – Mean and RMS value.
Unit – VI:
Differential Equations Definition of a differential equation-order and degree of a differential equation- formation of differential equations-solution of differential equation of the type first order, first degree, variable-separable, homogeneous equations, exact, linear differential equation of the form dy/dx + Py = Q, Bernoulli’s equation, nth order linear differential equation with constant coefficients both homogeneous and non homogeneous and finding the Particular Integrals for the functions , , Sin ax, Cos ax.
Unit-1:
Units and dimensions: Physical quantity-fundamental and derived physical quantities-unitsfundamental and derived units-SI units-multiples and sub-multiples in SIunits-advantages of SI units-dimensions and dimensional formulae-dimensionless quantities- applications and limitations of dimensional analysis-problems.
Unit-2:
Elements of vectors: Scalar and vector quantities-examples–graphical representation of a vector-types of vectorsaddition and subtraction of vectors-triangle law-parallelogram law and its cases-polygon lawresolution of a vector-unit vectors (i, j, k)-dot product and cross product of two vectorscharacteristics of dot and cross products-examples-problems.
Unit-3:
Kinematics and Friction Equations of motion-acceleration due to gravity-equations of motion under gravityexpressions for maximum height, time of ascent, time of descent, time of flight, velocity on reaching the point of projection-motion of a body projected from the top of a tower-projectile motion-examples-horizontal and oblique projections-expressions for maximum height, time of ascent, time of flight, horizontal range, magnitude and direction of resultant velocityproblems. Friction-normal reaction-laws of friction-coefficients of friction-angle of friction-methods of reducing friction-advantages and disadvantages of friction-motion of a body over a smooth inclined plane and a rough inclined plane–problems.
Unit-4:
Work, Power and Energy Work, power and energy-definitions and units-potential and kinetic energies-examples and expressions-law of conservation of energy-problems .
Unit-5:
Simple harmonic motion and acoustics Definition-conditions of SHM-examples of SHM-expressions for displacement, velocity, acceleration, time period, frequency and phase of SHM-time period of a simple pendulumseconds pendulum-problems. Sound-musical sound and noise-noise pollution-Effects and methods of control of Noise Pollution-Beats and echoe-problems-Doppler effect – Explanation, cases and Applications Acoustics of buildings-Reverberation-Sabines’ formula- characteristics of a good building-problems.
Unit:6:
Heat and Thermodynamics Expansion of gases-Boyle’s law-Absolute scale of temperature-charle’s laws-Ideal gas equation-Universal gas constant and its value-SI Units-problems-external work done by a gasisothermal process-adiabatic process-first law of thermodynamics and its applications to isothermal process and adiabatic process-two specific heats of a gas-relation between Cp and Cv-problems-second law of thermodynamics and its applications.
Unit:7
Modern Physics Photoelectric effect – explanation and its laws-applications of photoelectric effect (photocell) – critical angle and total internal reflection – optical fibers – principle, working , types and applications-concept of super conductivity – its properties and applications.
Diploma Holders in PHARMACY
- SECTION I PHARMACEUTICS
- SECTION II PHARMACEUTICAL CHEMISTRY
- SECTION III PHARMACOGNOSY
- SECTION IV PHARMACOLOGY
B.Sc.(Mathematics) Graduates
AP ECET Syllabus 2025 – Download Link
Download AP ECET Syllabus 2025 & Exam Pattern PDF | Click Here |
We hope that the information provided about AP ECET Syllabus 2025 will help crack the exam. Follow our PrepareExams.Com for the latest updates. Thank You.
How to Download AP ECET Syllabus 2025 PDF
Candidates must follow the provided step-by-step guide to download the AP ECET syllabus.
Step 1: Visit the official website i.e. https://www.cets.apsche.ap.gov.in.
Step 2: Click on the link “AP ECET Syllabus 2025 PDF”.
Step 3: The PDF will be displayed on the screen.
Step 4: Download and take a print of it for future reference.
★ ★ You Can Also Check ★ ★
Andhra Pradesh ECET Syllabus 2025 – FAQs
Q.1 Who is conducting the AP ECET Exam?
Answer: Andhra Pradesh State Council of Higher Education (APSCHE) is conducting the AP ECET Exam 2025.
Q.2 What is the Exam duration for AP ECET 2025?
Answer: The Exam duration for the AP ECET 2025 is 120 minutes.
Q.3 How many questions will be in the AP ECET 2025 Exam?
Answer: AP ECET 2025 Exam will consist of 200 Questions
Q.4 What is the type of exam in AP ECET 2025?
Answer: The type of exam is Multiple Choice Questions (MCQ).
******** End ********
★★★★ You Can Also Read ★★★★
Computer Awareness Quiz Questions Set (Banking) |
Read Daily Current Affairs Topic Wise |
Daily Current Affairs Quiz (Current GK Test) |
Static Gk Quiz Questions and Answers |
📣 Prepare Exams is now on Facebook, Twitter, Instagram, YouTube Channel, and Google News to get all the latest News first Like, Follow, and bookmark our website @ PrepareExams.com.