HomeSyllabusTSPSC Polytechnic Lecturer Syllabus 2023: Check Exam Pattern

TSPSC Polytechnic Lecturer Syllabus 2023: Check Exam Pattern

TSPSC Polytechnic Lecturer Syllabus 2023 PDF Download: Check Exam Pattern – Telangana State Public Service Commission (TSPSC) Officials released an Advertisement for Polytechnic Lecturer posts. the official syllabus for Telangana State Public Service Commission (TSPSC) Polytechnic Lecturer Exam has been released on the official website. aspirants can also check and download the Telangana State Public Service Commission (TSPSC) Polytechnic Lecturer Syllabus & Exam Pattern in the below sections. to make it easy, we have provided the download link of the TSPSC Polytechnic Lecturer Exam Syllabus along with the pattern below in the section. Stay connected to our website PrepareExams.Com for getting instant updates on TSPSC Polytechnic Lecturer Syllabus.

TSPSC Polytechnic Lecturer Syllabus & Exam Pattern 2023 – Overview

Board NameTelangana State Public Service Commission (TSPSC)
PostsPolytechnic Lecturer
Advertisement No
Job LocationTelangana
Selection ProcessWritten Test,

TSPSC Polytechnic Lecturer Exam Pattern 2023

The TSPSC Polytechnic Lecturer question paper of the recruitment test will be 300 questions with a Maximum mark of 450 marks and All questions carry equal marks. The Exam duration of the TSPSC Polytechnic Lecturer paper will be 5 Hours. for each wrong answer, a 0 mark will be deducted. Below the given table is for the TSPSC Polytechnic Lecturer Exam Pattern 2023.

  • Total Question – 300 Questions
  • Total Marks – 450 marks
  • Exam Duration – 5 Hours
  • Language –  
  • Mode of Exam –
  • Negative Marking – No, 0 Mark
PaperSubjects QuestionsTotal MarksDuration
Paper-IGeneral Studies and General Abilities150150150 Mins
Paper-IIRelated subjects150300150 Mins
Total300450300 Mins
★★ You Can Also Check ★★
TSPSC Polytechnic Lecturer Previous Question Papers PDF Download
TSPSC Polytechnic Lecturer Admit Card
TSPSC Polytechnic Lecturer Answer Key
TSPSC Polytechnic Lecturer Results
TSPSC Polytechnic Lecturer Exam

Subject Wise – TSPSC Polytechnic Lecturer Syllabus 2023


1. Current Affairs – Regional, National, and International.
2. International relations and events.
3. General Science; India’s Achievements in Science and Technology
4. Environmental issues; Disaster Management- Prevention and Mitigation Strategies.
5. Economic and Social Development of India and Telangana.
6. Physical, Social and Economic Geography of India.
7. Physical, Social and Economic Geography and Demography of Telangana.
8. Socio-economic, political, and cultural history of modern India with a special focus on
Indian National Movement.
9. Special focus on the socio-economic, political, and cultural history of Telangana Telangana state movement and formation of Telangana state.
10. Constitution of India; Indian Political System; Governance and Public Policy.
11. Social exclusion; Rights issues and policies like gender, caste, tribe, disability, etc.
12. Society, Culture, Heritage, Arts, and Literature of Telangana.
13. Telangana State Policies.
14. Logical Reasoning; Analytical Ability and Data Interpretation.
15. Basic English. (10th class Standard)


1. Architectural Engineering (Degree Level)

  • Basic Design
  • Building Materials
  • Engineering Mechanics
  • History and Architecture
  • Surveying and Site Studies
  • Water supply and Sanitary Engineering
  • Landscape design and site planning
  • Building Services
  • Sources of Building
  • Sociology of Human settlements
  • Town Planning
  • Advances Construction
  • Computer Applications

2. Automobile Engineering (Degree Level)

  • Heat Transfer and Thermodynamics
  • Automobile Power Plants
  • Strength of Materials
  • Fluid Mechanics and Hydraulic Machinery
  • Automobile Instrumentation
  • Automobile Chassis and Body Engineering
  • Automobile Transmission and Control systems
  • Automobile Electrical Systems
  • Material Science
  • Kinematics and Dynamics of Machines
  • Design of Automobile Parts
  • Production Technology
  • Industrial Engineering & Management
  • Electric vehicles
  • Transport Management and Legal aspects of Motor Transport
  • Farm tractors
  • Special Purpose Vehicles
  • Automobile Electronics
  • Automobile Servicing and Maintenance

3. Bio Medical Engineering (Degree Level)

  • Respiratory Measurements and Aid
  • Ventilators
  • Audiometry
  • Electro-Surgical Equipment: Electro – Surgical Units
  • Fibre Optics
  • Ophthalmic Instrumentation
  • Anesthesia Equipment, Boyle’s Apparatus, Gas Distribution Systems.
  • Ultrasound Applications for Surgery
  • Introduction to Bio-Medical Instrumentation.
  • Amplifiers for Bio-Medical applications
  • Electro-encephalography
  • Blood Pressure and blood flows
  • Phonocardiography
  • Radiation energy distribution
  • Methods of Chemical analysis
  • Electrical factors in Hospital Design
  • Ultrasonics
  • Magnetic Resonance Imaging:
  • Computed Tomography
  • Radio Nuclide Imaging
  • Medical Thermography
  • Position emission tomography
  • Cardioverters
  • Implantable pacemaker
  • Biomaterials
  • Prosthetic Heart Valves:
  • Types of mechanical Valves
  • Hemodialyze
  • Physical Therapy Equipment.
  • Nernst equation
  • Electrical Activity of the heart
  • Electrical activity of skeletal muscles-motor unit potentials
  • Introduction to bioelectric Phenomena of hearing
  • Interaction between Engineering and life sciences
  • Application of Engineering concepts and methods for understanding Physiological systems.
  • Electrophysiology Physiological signals, Characteristics, Basis of ECG, EMG, EEG and qualitative treatment of instrumentation for measuring these signals.
  • Biopotential, Electrodes, Electrode – Electrolyte Interface. Internal electrodes like needle electrodes and microelectrodes.
  • Equivalent circuit Properties. Broad classification of Biomedical Instrumentation for Clinical practice

4. Chemical Engineering (Degree Level)

  • Fluid Mechanics
  • Heat Transfer
  • Mass Transfer
  • Reaction Engineering
  • Thermo Dynamics
  • Mechanical Operations
  • Process Technology
  • Materials and Energy Balances
  • Instrumentation and Process Control
  • Material Technology
  • Environmental Studies and Pollution Control Engineering
  • Energy Technology & Plant Operation

5. Chemistry (Post Graduate Level)

  • Inorganic Chemistry
  • Atomic structure and chemical bonding
  • Chemistry of main group (I to VII & Nobel gases) elements
  • Chemistry of transition elements and inner transition elements.
  • General principles of metallurgy
  • Coordination Chemistry
  • Stability of metal complexes
  • Reaction mechanism of metal complexes
  • Metal carbonyls, Nitrosyls and Metallocenes – Structure and bonding
  • Bio-inorganic chemistry
  • Analytical chemistry
  • Physical Chemistry
  • Solutions and colligative properties
  • Acids & Bases
  • Thermo Dynamics
  • Electrochemistry
  • Quantum Chemistry
  • Chemical Kinetics
  • Photo Chemistry
  • Solid state chemistry
  • Organic Chemistry
  • IUPAC nomenclature of organic molecules. Isomerism – classification of isomers
  • alkane, alkenes, alkynes
  • Stereo chemistry
  • Introduction to conformational isomerism, Klyne
  • Nature of bonding in organic molecules and aromaticity
  • Reactive intermediate
  • Organic reaction mechanism
  • Oxidation
  • Reductions
  • Heterocyclic chemistry
  • Alkaloids and Terpenoids
  • Organic photochemistry
  • Pericyclic reactions
  • Basic principles, concepts of UV, IR, H1NMR, C13NMR and Mass spectroscopic methods – structure determination of organic compounds by UV, IR, H1NMR, C13NMR and Mass spectroscopic methods. Green chemistry

6. Civil Engineering (Degree Level)

  • Building Materials And Construction
  • Strength of Materials And Theory of Structures
  • Cement Concrete and Steel Structures
  • Fluid Mechanics and Hydraulics
  • Hydrology and Water Resources Engineering
  • Environmental Engineering
  • Transportation Engineering
  • Soil Mechanics and Foundation Engineering
  • Estimation, Costing and Construction Management
  • Construction Management
  • Surveying

7. Electrical and Electronics Engineering (Degree Level)

  • Electric Circuits and Fields
  • Electrical Machines
  • Power Systems
  • Control Systems
  • Electrical and Electronic Measurements
  • Analog and Digital Electronics
  • Power Electronics
  • Electronic Drives
  • Utilization

8. Electronics and Communication Engineering (Degree Level)

Section I -Engineering Mathematics

  • Linear Algebra
  • calculus
  • Network solution methods
  • Differential Equations
  • Complex Variables
  • Probability and Statistics
  • Numerical Methods

Section II-Networks

  • Network solution methods
  • Electronic Circuits
  • Analog Circuits
  • Amplifiers

Section III

  • Digital Circuits
  • Combinatorial circuits
  • Sequential Circuits
  • Microprocessor (8085)
  • Signals & Systems
  • Linear Time-Invariant (LTI) Systems
  • Control Systems
  • Tools and techniques for LTI control system analysis


  • Communications
  • Analog Communication System
  • Digital Communication System
  • Digital modulation schemes
  • Electro Magnetics

9. Electronics and Instrumentation Engineering (Degree Level)

  • Communications
  • Analog Electronics
  • Digital Electronics
  • Electrical and Electronic Measurements
  • Process Instrumentation
  • Control Systems and Process Control
  • Analytical, Optical and Biomedical Instrumentation
  • Embedded Systems

10. Foot wear Technology (Degree Level) Classification

  • Anatomy of Foots
  • Foot Measurements
  • Lasts-Materials-classification
  • Foot Wear Designing
  • Clicking
  • Pre fitting and Closing-Splitting-Identification
  • Foot wear Materials
  • Bottoming operations
  • Finishing Operations
  • Upper Finishing Operations
  • Different Footwear Construction
  • Speciality Foot Wear
  • Testing
  • Quality Control
  • Leather Goods and Garments
  • Hand Tools used in Footwear Manufacturing
  • Foot Wear Machines
  • Costing
  • Leather Making-Operations involved in making Leather

11. Geology (Post Graduate Level)

  • Geomorphology & Field Geology
  • Crystallography, Mineralogy& Optical Mineralogy
  • Structural geology and Geotectonics
  • Palaeontology & Stratigraphy
  • Igneous Petrology & Geochemistry
  • Metamorphic Petrology & Thermodynamics
  • Sedimentology & Petroleum Geology
  • Ore Genesis, Mineral Deposits and Mineral economics
  • Environmental Geology
  • Engineering Geology
  • Mineral Exploration and Fuels
  • Hydrogeology
  • Photo Geology, Remote Sensing, GIS and GPS
  • Mining Geology

12. Letter Press ( Printing Technology) (Degree Level)

  • Printing Processes, Paper & Ink Technology
  • Offset Process, Gravure Process & their Surface Preparation
  • Flexography, Screen Printing & their Surface Preparation
  • Pre-Press Technology
  • Print Finishing, Packaging & Converting
  • Specialty Printing Technologies, Advertising & Quality Control

13. Mechanical Engineering (Degree level)

Section I: Applied Mechanics and Design

  • Engineering Mechanics
  • Strength of Materials
  • Theory of Machines
  • Vibrations
  • Machine Design

Section II: Fluid Mechanics and Thermal Sciences

  • Fluid Mechanics
  • Heat Transfer
  • Thermo Dynamics
  • Power Engineering
  • I.C. Engines
  • Refrigeration and Air-Conditioning
  • Turbomachinery

Section III: Materials, Manufacturing and Industrial Engineering

  • Engineering Materials
  • Metal Casting
  • Metal Forming
  • Joining Processes
  • Machining and Machine Tool Operations
  • Metrology and Inspection
  • Computer Integrated Manufacturing
  • Production Planning and Control
  • Inventory Control
  • Operations Research

14. Metallurgical Engineering ( Degree Level)

  • Mineral processing and principles of extractive metallurgy
  • Physical metallurgy and heat treatment
  • Metallurgical thermodynamics
  • Mechanical metallurgy
  • Iron & steel making:
  • Nonferrous extractive metallurgy
  • Mechanical working of metals
  • Powder metallurgy of metals
  • Non–metallic materials
  • Material processing (casting & welding
  • Furnace technology & pyrometry
  • Nondestructive testing
  • Superalloys

15. Packing Technology (Degree Level)

  • Packing Basics
  • Packing Materials
  • Testing of packaging materials
  • Packaging of pharmaceuticals
  • Product Packaging
  • Product Designing
  • Package Printing
  • Packaging processes and machines
  • Packaging management and economics
  • Eco-friendly and export packaging

16. Pharmacy (Degree Level)

  • History of Pharmacy
  • Pharmacy Act
  • Methods of Sterilization and test for sterility
  • Methods of classification of crude drugs; Adulteration and evaluation of crude drugs.
  • Introduction to secondary metabolites
  • Pharmacognosy of Senna
  • Principles and methods of different microbiological assay
  • Theory and applications of rheology
  • Physico-Chemical, formulation, and biological factors affecting drug absorption
  • Preformulation Studies
  • Drug Stability
  • Radiopharmaceuticals
  • Structure-activity relationship, synthesis, chemical nomenclature, and uses of following
  • classes of drugs
  • Pharmacology of Local anesthetics
  • Pharmacokinetic and Pharmacodynamic drug interactions with suitable examples

17. Physics (Post Graduate Level)

  • Mathematical Methods of Physics
  • Classical Mechanics
  • Electromagnetic Theory
  • Quantum mechanic
  • Thermodynamics and statistical Physics Electronics
  • Atomic & Molecular Physics
  • Condensed Matter Physics
  • Nuclear and Particle Physics

18. Tannery Engineering (Degree Level)

  • Skin Proteins and Pre- tannages
  • Theory of tannages
  • Leather auxiliaries and post tanning Operations
  • The practice of Leather manufacturing – I
  • Role of Machinery in Leather Processing
  • The practice of Leather Manufacture – II
  • Material Testing & Quality Control
  • Leather Product Technology
  • Organisation and Management of Leather manufacture

19. Textile Technology (Degree Level)

  • Textile fiber
  • Spinning
  • weaving
  • Woven fabric design
  • Chemical processing of textiles
  • Apparel production
  • Textile testing
  • Statistical tools and quality control
  • Textile mathematics
  • knitting & nonwoven technology
  • Technical textiles

TSPSC Polytechnic Lecturer Syllabus 2023 – Download Link

Download TSPSC Polytechnic Lecturer Syllabus 2023 & Exam Pattern PDFClick Here

TSPSC Polytechnic Lecturer Syllabus 2023 – FAQs

For how many marks, TSPSC Polytechnic Lecturer Exam will be held?

TSPSC Polytechnic Lecturer Exam will be held for 100 Marks.

Who is conducting the TSPSC Polytechnic Lecturer Exam?

The officials of the Telangana State Public Service Commission (TSPSC) are conducting the TSPSC Polytechnic Lecturer Exam.

What is the Exam duration for TSPSC Polytechnic Lecturer Exam?

The Exam duration for TSPSC Polytechnic Lecturer Exam is 2 Hours.

★★★★  You Can Also Read  ★★★★

Computer Awareness Quiz Questions Set (Banking)
Read Daily Current Affairs Topic Wise
Daily Current Affairs Quiz (Current GK Test)
Static Gk Quiz Questions and Answers

📣 Prepare Exams is now on Facebook, Twitter, Instagram, YouTube Channel, and Google News to get all the latest News first Like, Follow and bookmark our website @

For all the latest Updates, download PrepareExams App.

******** End ********


Please enter your comment!
Please enter your name here

Latest News