HomeEntrance Exam SyllabusMAH B.Planning CET Syllabus 2024: Check Exam Pattern

# MAH B.Planning CET Syllabus 2024: Check Exam Pattern

MAH B.Planning CET Syllabus 2024 PDF Download: Check Exam Pattern – State Common Entrance Test Cell, Maharashtra officials have released MAH B.Planning CET Syllabus 2024 and MAH B.Planning CET Exam Pattern PDF. candidates who are preparing for MAH B.Planning CET 2024 can download the MAH B.Planning CET Exam Pattern 2024, and MAH B.Planning CET Syllabus 2024 PDFs from the official website @cetcell.mahacet.org. here, we have provided the subject-wise MAH B.Planning CET Exam Syllabus 2024 PDFs on this page.

## MAH B.Planning CET Exam Pattern 2024

The MAH B.Planning CET test will be 100 questions with a Maximum mark of 200 marks and All questions carry equal marks. The Exam duration of the MAH B.Planning CET Exam will be 2 Hours. for each wrong answer, – marks will be deducted. The given table is for the MAH B.Planning CET Exam Pattern 2024.

• Total Question – 100 Questions
• Total Marks – 200 Marks
• Exam Duration – 120 Minutes
• Language –
• Mode of Exam – Online
• Exam Type – Multiple Choice Questions (MCQ)
• Negative Marking – No

## MAH B.Planning CET Syllabus 2024 – Subject Wise

### Part I – Mathematics

Unit-1: Sets, Relations, and Functions:

Sets and their representation: Union, intersection, and complement of sets and their algebraic properties; Power set; Relation, Type of relations, equivalence relations, functions; one-one, into and onto functions, the composition of functions.

Unit-2: Complex Numbers and Quadratic Equations:

Complex numbers as ordered pairs of reals, Representation of complex numbers in the form a + ib and their representation in a plane, Argand diagram, algebra of complex number, modulus and argument (or amplitude) of a complex number, triangle inequality, Quadratic equations in real and complex number system and their solutions, Relations between roots and co-efficient, nature of roots, the formation of quadratic equations with given roots.

Unit-3: Matrices and Determinants:

Matrices, algebra of matrices, type of matrices, determinants, and matrices of order two and three, properties of determinants, evaluation of determinants, area of triangles using determinants, Adjoint and evaluation of inverse of a square matrix using determinants and elementary transformations, Test of consistency and solution of simultaneous linear equations in two or three variables using determinants and matrices.

Unit-4: Permutations and Combinations:

The fundamental principle of counting, permutation as an arrangement and combination as section, Meaning of P (n,r) and C (n,r), simple applications.

Unit-5: Mathematical Inductions:

Principle of Mathematical Induction and its simple applications

Unit-6: Binomial Theorem and its Simple Applications:

Binomial theorem for a positive integral index, general term and middle term, properties of Binomial coefficients, and simple applications

Unit-7: Sequence and Series:

Arithmetic and Geometric progressions, insertion of arithmetic, geometric means between two given numbers, and Relation between A.M and G.M sum up to n terms of special series; Sn, Sn2, Sn3. Arithmetic-Geometric progression.

Unit-8: Limit, Continuity, and Differentiability:

Real-valued functions, algebra of functions, polynomials, rational, trigonometric, logarithmic and exponential functions, inverse functions. Graphs of simple functions. Limits, continuity, and differentiability. Differentiation of the sum, difference, product, and quotient of two functions. Differentiation of trigonometric, inverse trigonometric, logarithmic, exponential, composite, and implicit functions; derivatives of order up to two, Rolle’s and Lagrange’s Mean Value Theorems, Applications of derivatives: Rate of change of quantities, monotonic-Increasing and decreasing functions, Maxima and minima of functions of one variable, tangents and normal.

Unit- 9: Integral Calculus:

Integral as an anti-derivative, Fundamental Integrals involve algebraic, trigonometric, exponential, and logarithmic functions. Integrations by substitution, by parts, and by partial functions, Integration using trigonometric identities. Evaluation of simple integrals of the type Integral as limit of a sum. The fundamental theorem of calculus, properties of definite integrals. Evaluation of definite integrals, determining areas of the regions bounded by simple curves in standard form.

Unit-10: Differential Equations

Ordinary differential equations, their order and degree, the formation of differential equations, solution of differential equation by the method of separation of variables, and solution of a homogeneous and linear differential equation of the type.

Unit-11: Co-Ordinate Geometry

• Cartesian system of rectangular coordinates, 10 in a plane, distance formula, sections formula, locus, and its equation, translation of axis, slop of a line, parallel and perpendicular lines, intercept of a line on the coordinate axes.
• Straight-line – Various forms of equations of a line, intersection of lines, angles between two lines, conditions for concurrence of three lines, the distance of a point form a line, equations of internal and external by sectors of angles between two lines co-ordinate of the centroid, orthocentre and circumcentre of a triangle, equation of the family of lines passing through the point of intersection of two lines.
• Circle, conic sections – A standard form of equations of a circle, the general form of the equation of a circle, its radius and central, equation of a circle when the endpoints of a diameter are given, points of intersection of a line and a circle with the center at the origin and condition for a line to be tangent to a circle, equation of the tangent, sections of conics, equations of conic sections (parabola, ellipse, and hyperbola) in standard forms, condition for Y = MX +c to be a tangent and point (s) of tangency.

Unit-12: Three-Dimensional Geometry

Coordinates of a point in space, the distance between two points, section formula, directions ratios, and direction cosines, and the angle between two intersecting lines. Skew lines, the shortest distance between them, and their equation. Equations of a line and a plane in different forms, the intersection of a line and a plane, and coplanar lines.

Unit-13: Vector Algebra

Vectors and scalars, the addition of vectors, components of a vector in two dimensions and three-dimensional space, scalar and vector products, scalar and vector triple product.

Unit-14: Statistics and Probability

• Measures of discretion; calculation of mean, median, mode of grouped and ungrouped data calculation of standard deviation, variance and mean deviation for grouped and ungrouped data.
• Probability: Probability of an event, addition and multiplication theorems of probability, Baye’s theorem, probability distribution of a random variate, Bernoulli trials and binomial distribution.

Unit-15: Trigonometry

Trigonometrical identities and equations, trigonometrical functions, inverse trigonometrical functions, and their properties, heights, and distance.

Unit -16: Mathematical Reasoning

Statement logical operations and, or, implies, implied by, if and only if, understanding of tautology, contradiction, converse, and contrapositive.

### Part II – Aptitude

Unit-1

Awareness of persons. Buildings, Materials. Objects, Texture related to Architecture and Build-environment, Visualising three-dimensional objects from two-dimensional drawings. Visualizing. Different sides of three-dimensional objects. Analytical Reasoning Mental Ability (Visual, Numerical, and Verbal)

Unit- 2: Three Dimensional- Perception:

Understanding and appreciation of scale and proportions of objects, building forms and elements, color texture harmony and contrast Design and drawing of geometrical or abstract shapes and patterns in pencil. Transformation of forms in both 2D and 3D union, subtraction rotation, development of surfaces and volumes, Generation of Plan, elevations, and 3D views of objects, Creating two-dimensional and three-dimensional compositions using given shapes and forms.

### Part III – Planning

Unit-1: General Awareness

General knowledge questions and knowledge about prominent cities, development issues, government programs, etc.

Unit-2: Social Sciences

The idea of nationalism, nationalism in India, the pre-modern world, 19th-century global economy, colonialism, colonial cities, industrialization, resources and development, types of resources, agriculture, water, mineral resources, industries, national economy; Human Settlements. Power-sharing, federalism, political parties, democracy, the constitution of India. Economic development- economic sectors, globalization, the concept of development, poverty; Population structure, social exclusion, and inequality, urbanization, rural development, colonial cities.

Unit-3: Thinking Skills

Comprehension (unseen passage); map reading skills, scale, distance, direction, area, etc.; critical reasoning; understanding of charts, graphs, and tables; basic concepts of statistics and quantitative reasoning.

Note: The above-provided MAH B.Planning CET Syllabus is only for reference purposes. If you have any questions in your mind you can comment in the comment box below. stay connected with PrepareExams.Com for more important stuff regarding MAH B.Planning CET Syllabus 2024 PDF Download & MAH B.Planning CET Exam Pattern 2024, THANK YOU

## MAH B.Planning CET Syllabus 2024 – FAQs

Q.1 Who is conducting the MAH B.Planning CET Exam?

Answer: State Common Entrance Test Cell, Maharashtra is conducting the MAH B.Planning CET Exam 2024.

Q.2 What is the Exam duration for the MAH B.Planning CET 2024?

Answer: The Exam duration for the MAH B.Planning CET 2024 is 120 Minutes.

Q.3 How many questions will be in the MAH B.Planning CET 2024 Exam?

Answer: MAH B.Planning CET 2024 Exam will consist of 100 Questions

Q.4 What is the type of exam in MAH B.Planning CET 2024?

Answer: The type of exam is Multiple Choice Questions (MCQ).

★★★★  You Can Also Read  ★★★★

📣 Prepare Exams is now on Facebook, Twitter, Instagram, YouTube Channel, and Google News to get all the latest News first Like, Follow and bookmark our website @ PrepareExams.com.