HomeSyllabusRITES Engineer Syllabus 2022 PDF Download: Check Exam Pattern

RITES Engineer Syllabus 2022 PDF Download: Check Exam Pattern

RITES Engineer Syllabus 2022 PDF Download: Check Exam Pattern – In this article, students will find the RITES Engineer Exam Syllabus PDF direct links, RITES Engineer Exam Pattern 2022, RITES Engineer Selection Process, and so on and will get the latest and updated RITES Engineer Syllabus 2022 along with Exam Pattern.

RITES Engineer Syllabus 2022 – Overview

Board NameRites Limited
PostsEngineer
CategorySyllabus
Job LocationIndia
Selection ProcessWritten Test, Interview,
Medical Examination
Official Websiterites.com

RITES Engineer Exam Pattern 2022

  • Interview – 35%
  • Written Exam – 60%
  • Experience – 5%
  • Technical & Professional proficiency – 25 %
  • Personality Communication & Competency – 10%
  • Total – 100%
Also Read:
RITES Engineer Previous Question Papers PDF Download
RITES Engineer Admit Card
RITES Engineer Answer Key
RITES Engineer Results
RITES Engineer Exam

RITES Engineer Syllabus 2022

Download RITES Engineer Syllabus 2022 & Exam Pattern PDFClick Here

Subject Wise – RITES Engineer Syllabus

Senior Contract Expert & Planning Procurement Engineer

  • General Aptitude/ General Knowledge/ General Awareness/ Latest events etc
  • Surveying
  • Geo Technical Engineering
  • Quantity Surveying, Contract & Tenders
  • Design of Reinforced Concrete Structures
  • Highway Engineering
  • Railway Engineering

Senior Track Expert

  • General Aptitude/ General Knowledge/ General Awareness/ Latest events
  • Surveying
  • Geo Technical Engineering
  • Quantity Surveying, Contract & Tenders
  • Highway Engineering
  • Railway Engineering

QS and Billing Engineer, Section Engineer Civil, Section Engineer Civil, Site Engineer QA/QC (Lab)

  • General Aptitude/ General Knowledge/ General Awareness /Latest events etc
  • Surveying
  • Geo Technical Engineering
  • Quantity Surveying, Contract & Tenders
  • Construction Supervision
  • Structural Analysis
  • Design of Reinforced Concrete Structures
  • Design of Steel Structures
  • Highway Engineering
  • Railway Engineering

Design Engineer (Civil)

  • General Aptitude/ General Knowledge/ General Awareness/ Latest events etc
  • Surveying
  • Geo Technical Engineering
  • Quantity Surveying, Contract & Tenders
  • Structural Analysis
  • Design of Reinforced Concrete Structures
  • Design of Steel Structures
  • Highway Engineering
  • Railway Engineering

Assistant Safety and Health Expert

  • General Aptitude / General Knowledge / General Awareness/Latest events etc
  • General workers amenities for Construction sites.
  • Housekeeping [Stacking of materials], P&M (Plants & Machineries), Various safety trainings, Audits &
  • Safety Inspections while working in Urban Areas, Barricading, Utilities etc.
  • Working at height, fall protection, platform, temporary structures, Access.
  • Mobile Elevated working platform (MEWP).
  • Lifting Appliances and Gear, means crane hoist machinery, derrick, winch, Hoist drum, Pulley block. Test and periodical examination of lifting appliances & Gears, ASLI (Automatic safe load Indication).
  • Electricity, Assessment & Power Strength and capability of electrical equipment.
  • Distribution Systems: 3 Phase and Single Phase and low voltage of 110 Volt for lighting Electrical protection System ELCB/RCCBs earthing of Electrical Equipment.
  • Industrial Cables:- Working near H.T. Lines, Site illumination Near
  • Welding, Gauging and Cuttings.
  • Deep Excavations (More than 1.5 mtr)
  • Works permit system, for Hot work heavy lifting permit.
  • Entry to confined spaces, tendons lifting- Traffic Diversion / Traffic management PPEs (Personal Protective Equipment).
  • Requirements of ISO 45001:2018

Drawing & Design Engineer/ Electrical, Section Engineer (Electrical), Section Engineer (Electrical), & Senior Resident Engineer/Electrical (Assistant Resident Engineer – Electrical (General & OHE)

  • Electric Circuits and Fields
  • Signals and Systems
  • Electrical Machines
  • Power Systems
  • Control Systems
  • Electrical and Electronic Measurements
  • Analog and Digital Electronics
  • Power Electronics and Drives
  • Application/utilization of Electrical Energy
  • Properties of Electrical System
  • Planning & Design of Electrical Works
  • Inspection and testing

Drawing and Design Engineer / S & T, SECTION ENGINEER/S&T

  • Section A – General
    • Preparation of estimates.
    • S&T stores & procurement of materials.
    • Tender & Contracts
    • Rajbhasha
  • Section B – Signalling
    • Basic concepts of signalling.
    • G&SR, Signal Engineering Manual, Schedule of dimension, BlockManual.
    • Concepts of Route Relay/ Panel Interlocking & Principles / Standard of Interlocking.
    • Different types of Track occupancy/clearance devices.
    • Requirement and types of Power supply System for signalling installations.
    • Different types of Block Proving Devices.
    • Special requirements of signalling/ telecommunication for AC/DC traction.
    • Requirement, installation and maintenance practices of Point machines, signalling cable, power cables, signal lamps, Electrical/Mechanical lifting barrier & other signalling gears.
    • IBH / IBS
    • Centralized Traffic Control.
    • Electronic Interlocking.
    • ETCS / TPWS / AWS.

Section Engineer/ S&T

  • Section: A – General
    • Preparation of estimates.
    • S&T stores & procurement of materials.
    • Tender & Contracts
    • Rajbhasha
  • Section: B – Telecommunication
    • Type of Railway Control Communication and TMS
    • Copper/Optical Fibre Cable for Railway applications.
    • Microwave Communication.
    • General concepts of digital transmission systems.

CAD Operator (Draftsman / CAD Operator)

  • General Intelligence & Reasoning, General Awareness, English Language.
  • Knowledge of P Way drawing preparation, Rail alignment including Geometric design Railway / Metro yards.
  • Knowledge of CAD Software
  • Starting with Sketching
  • Working with Drawing Aids
  • Editing Sketched Objects
  • Layers
  • Editing Sketched Objects II
  • Creating Text and Tables
  • Dimensioning and Detailing Your Drawings
  • Editing Dimensions
  • Dimension Styles
  • Adding Constraints to Sketches
  • Hatching Drawings
  • Paper Space
  • Plotting Drawings In AutoCAD
  • Template Drawings
  • Working with Blocks
  • Dynamic Blocks
  • AutoCAD Sheet Sets

******** End ********

★★★★  You Can Also Read  ★★★★

Computer Awareness Quiz Questions Set (Banking)
Read Daily Current Affairs Topic Wise
Daily Current Affairs Quiz (Current GK Test)
Static Gk Quiz Questions and Answers

📣 Prepare Exams is now on Facebook, Twitter, Instagram, YouTube Channel, and Google News to get all the latest News first Like, Follow and bookmark our website @ PrepareExams.com.

For all the latest Updates, download PrepareExams App.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Advertisement

Latest Articles